I purchased a microwave at Sears and they couldn't install it because my contractors had to do some other stuff first.  Now I need to have the microwave professionally installed over the range.  I was told it needs a special cabinet built.  Does anybody out there know somebody who could do this?  I'm guessing the person would need electrical plus carpentry knowledge.  Thanks.

Views: 86

Reply to This

Replies to This Discussion

If its a built in over the range micro/hood vent it should fit in the 30" space between the over head cabinets where the range goes. Normally I install a dedicated circuit for these as they need it. A crawl space in the attic really helps. You do not normally need a special "cabinet". Let me know if you have any other questions.

RSS

Connect with Us!

Latest Activity

Profile IconDuke City Fix via Facebook
Facebook6 hours ago · Reply
Profile IconDuke City Fix via Facebook
Thumbnail

Check out Megan's review of Nutcracker on the Rocks! This is the final weekend....

www.dukecityfix.com

dukecityfix.com

Facebook6 hours ago · Reply
Events NHCC posted events
6 hours ago
Kitson Harvey liked Megan's blog post Nutcracker On The Rocks A Delightful Surprise
6 hours ago

Regular Features

Anyone can blog on the Duke City Fix, but here are the folks who blog most often:

© 2016   Created by Duke City Fix.   Powered by

Badges  |  Report an Issue  |  Terms of Service